Our website is made possible by displaying online advertisements to our visitors.Please consider supporting us by disabling your ad blocker.
Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu
Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

Translate it in your own Language

Print this Job Post

Print Friendly and PDF

Tuesday, June 10, 2014

Computer Network-2

26.What is ICMP?
Answer:
ICMP is Internet Control Message Protocol, a network layer protocol of the TCP/IP suite used by hosts and gateways to send notification of datagram problems back to the sender. It uses the echo test / reply to test whether a destination is reachable and responding. It also handles both control and error messages.

27.What are the data units at different layers of the TCP / IP protocol suite?
Answer:
The data unit created at the application layer is called a message, at the transport layer the data unit created is called either a segment or an user datagram, at the network layer the data unit created is called the datagram, at the data link layer the datagram is encapsulated in to a frame and finally transmitted as signals along the transmission media.

28.What is difference between ARP and RARP?
Answer:
The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network by sending a ARP query packet that includes the IP address of the receiver.
The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.

29.What is the minimum and maximum length of the header in the TCP segment and IP datagram?
Answer:
The header should have a minimum length of 20 bytes and can have a maximum length of 60 bytes.   
                     
30.What is the range of addresses in the classes of internet addresses? 
Answer:
Class A      0.0.0.0      - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255

31.What is the difference between TFTP and FTP application layer protocols?
Answer:
The Trivial File Transfer Protocol (TFTP) allows a local host to obtain files from a remote host but does not provide reliability or security. It uses the fundamental packet delivery services offered by UDP.
The File Transfer Protocol (FTP) is the standard mechanism provided by TCP / IP for copying a file from one host to another. It uses the services offer by TCP and so is reliable and secure. It establishes two connections (virtual circuits) between the hosts, one for data transfer and another for control information.

32.What are major types of networks and explain?
Answer:

Server-based network:

Peer-to-peer network, computers can act as both servers sharing resources and as clients using the resources.

Peer-to-peer network

Server-based networks provide centralized control of network resources and rely on server computers to provide security and network administration

33.What are the important topologies for networks?
Answer:

BUS topology:

In this each computer is directly connected to primary network cable in a single line.
Advantages:
Inexpensive, easy to install, simple to understand, easy to extend.

STAR topology:

In this all computers are connected using a central hub.
Advantages:
Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.

RING topology:

In this all computers are connected in loop.
Advantages:
All computers have equal access to network media, installation can be simple, and signal does not degrade as much as in other topologies because each computer regenerates it.

34.What is mesh network?
Answer:
A network in which there are multiple network links between computers to provide multiple paths for data to travel.

35.What is difference between baseband and broadband transmission?
Answer:
In a baseband transmission, the entire bandwidth of the cable is consumed by a single signal. In broadband transmission, signals are sent on multiple frequencies, allowing multiple signals to be sent simultaneously.

36.Explain 5-4-3 rule?
Answer:
In a Ethernet network, between any two points on the network ,there can be no more than five network segments or four repeaters, and of those five segments only three of segments can be populated.

37.What MAU?
Answer:
In token Ring , hub is called Multistation Access Unit(MAU).

38.What is the difference between routable and non- routable protocols?
Answer:
Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router

39.Why should you care about the OSI Reference Model?
Answer:
It provides a framework for discussing network operations and design.

40. What is logical link control?
Answer:
One of two sublayers of the data link layer of OSI reference model, as defined by the IEEE 802 standard. This sublayer is responsible for maintaining the link between computers when they are sending data across the physical network connection. 

41. What is virtual channel?
Answer:
Virtual channel is normally a connection from one source to one destination, although multicast connections are also permitted. The other name for virtual channel is virtual circuit.

42.What is virtual path?
Answer:
Along any transmission path from a given source to a given destination, a group of virtual circuits can be grouped together into what is called path.

43. What is packet filter?
Answer:
Packet filter is a standard router equipped with some extra functionality. The extra functionality allows every incoming or outgoing packet to be inspected. Packets meeting some criterion are forwarded normally. Those that fail the test are dropped.

44.What is traffic shaping?
Answer:
One of the main causes of congestion is that traffic is often busy. If hosts could be made to transmit at a uniform rate, congestion would be less common. Another open loop method to help manage congestion is forcing the packet to be transmitted at a more predictable rate. This is called traffic shaping.

45.What is multicast routing?
Answer:
Sending a message to a group is called multicasting, and its routing algorithm is called multicast routing.

46.What is region?
Answer:
When hierarchical routing is used, the routers are divided into what we will call regions, with each router knowing all the details about how to route packets to destinations within its own region, but knowing nothing about the internal structure of other regions.

47.What is silly window syndrome? 
Answer:
It is a problem that can ruin TCP performance. This problem occurs when data are passed to the sending TCP entity in large blocks, but an interactive application on the receiving side reads 1 byte at a time.

48.What are Digrams and Trigrams?
Answer:
The most common two letter combinations are called as digrams. e.g. th, in, er, re and an. The most common three letter combinations are called as trigrams. e.g. the, ing, and, and ion.

49.Expand IDEA.
Answer:
IDEA stands for International Data Encryption Algorithm.

50.What is wide-mouth frog?
Answer:
Wide-mouth frog is the simplest known key distribution center (KDC) authentication protocol.

                         « Prev 123 Next »

No comments:

Post a Comment

Copyright @ CrackMNC 2014-2024
Divas Nikhra Theme by Crack MNC